SPSETTERMIOS(1) SPSETTERMIOS(1) NAME spsettermios - set the serial port termios SYNOPSIS spsettermios [-d device] [-l lockfile] [-v] DESCRIPTION Spsettermios is for setting the termios(3) serial port settings. The default port is /dev/ttyS0 at 38400 baud. The default semaphore lock file is /var/lock/LCK..ttyS0, which has an fcntl(2) advisory lock applied, also. The program is useful for setting the termios(3) data to a known state. The data should be acquired using the spgettermios(1) program. OPTIONS -d device Device name, (/dev/ttyS0). -l lockfile Lock file name, (/var/lock/LCK..ttyS0). -v Print the program's version information WARNINGS The termios(3) and fopen(2) settings tested only on Linux 2.4, and on US Robotics 56K, V.92, and, 33.6 Sportster. No others were tested. The semaphore locking mechanism uses fcntl(2), and may not be compatible with other serial programs. SEE ALSO spcid(1), spgettermios(1) spsettermios(1), spttyS0(1), spttyS1(1), sprawS0(1), sprawS1(1), phone.sh(1) DIAGNOSTICS Error messages for incompatible arguments, inaccessible files, and opening and closing files. AUTHORS ---------------------------------------------------------------------- A license is hereby granted to reproduce this software source code and to create executable versions from this source code for personal, non-commercial use. The copyright notice included with the software must be maintained in all copies produced. THIS PROGRAM IS PROVIDED "AS IS". THE AUTHOR PROVIDES NO WARRANTIES WHATSOEVER, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY, TITLE, OR FITNESS FOR ANY PARTICULAR PURPOSE. THE AUTHOR DOES NOT WARRANT THAT USE OF THIS PROGRAM DOES NOT INFRINGE THE INTELLECTUAL PROPERTY RIGHTS OF ANY THIRD PARTY IN ANY COUNTRY. Copyright (c) 1994-2006, John Conover, All Rights Reserved. Comments and/or bug reports should be addressed to: john@email.johncon.com (John Conover) ---------------------------------------------------------------------- June 18, 2006 SPSETTERMIOS(1)